No. Timber needs different tooling and a different process to the sheet goods we run.

No.

Cabinet makers, commercial fitout contractors, large kitchen manufacturers, shopfitters, builders, and kitchen and bathroom designers across Melbourne.

Send your drawing files or cut list through the contact form or by email and we'll get a quote back to you. CabMaster .QID, nesting folders, CAD files, PDFs, hand sketches, or a plain cut list — whatever you've got. A production ready file is best.

No minimum. We run single kitchens through to high volume orders. Send it through and we'll tell you straight up if it's a fit.

CabMaster .QID and nesting folders, CAD files, PDF cut lists, or a manual cut list in any format. Not sure if yours will work? Send it through and we'll check before quoting.

Yes — we're built for it.

We run a project management system built specifically for coordinating multiple bulk orders at the same time.

Every panel's labelled by cabinet number to match your drawings. Orders are palletised and sized to suit your vehicle — ute, van, or trailer — so you can forklift straight on with zero handling.

Mostly it's pickup from our Sunshine North workshop.

31 Harvester Ave, Sunshine North VIC 3020 — Melbourne's western industrial corridor. B double access, easy run from the CBD and western suburbs.

German Homag CNC gear, end to end.

Carcass cut, colour board cut, edge banding on all lengths, cam hole drilling (Häfele Rafix20), gang drilling for adjustable shelves, Legrabox cutouts, glass door cutouts, LED channel routing, wine rack interlock cutting. We also do base, wall, corner and tall cabinet assembly, plus drawer and kicker box assembly.

5 to 7 business days from order confirmation.

Full sheets up to 3600 x 1800mm, panels up to 40mm thick. We nest the cuts to get the most out of every sheet and cut down on waste.

Polytec and Laminex HMR particleboard as standard, including moisture resistant HMR board for kitchens and bathrooms.

1mm and 2mm ABS, run through two dedicated edge banding lines — one for white and light solids, a separate line for dark, textured, and woodgrain. Keeps colours clean and the edge matched across every panel.

Yes. Hinge plates, drawer runner locations, and system holes pre drilled to 0.1mm at time of production. Just specify the brand and pattern when you order.

Blum, Lincoln Sentry, and Häfele — hinges, runners, lift systems. Hettich and Grass patterns also supported. Order it with your cut job and we'll pre drill it straight into your panels.

Yes. Shaker and custom door profiles cut in house from premium MDF. Straight cut (90°) or 45° bevel, with variable pocket depths and border widths. Supplied paint ready for 2pac — no site routing needed.

Yes. We machine panels to take Stickman snap in profiles — corners, edges, joinery all routed to spec so they click in on site, no extra routing or rework. We hold ±0.5mm tolerance on every Stickman job so it snaps first time. Popular with shopfitters and joiners on retail and commercial fitouts.

Stickman is an aluminium profile system used in commercial and retail fitouts for corners, edges, and snap in joinery. We route your panels to take these profiles before they leave the shop, so on site they click straight in — no extra routing, no rework. ±0.5mm tolerance on every job is what makes the snap fit reliable.

Kitchens and islands, bathrooms and vanities, wardrobes and walk in robes, laundries, garages, entertainment units. All Polytec and Laminex HMR substrates available.

Shopfitting and retail, food and hospitality, petrol stations, medical and dental, offices, beauty and personal care, gyms, automotive, vet clinics, hotels, education and childcare, aged care, and warehouses and industrial.

Yes, bulk orders and multi stage rollouts are something we do all the time. Parts are labelled for fast install on site, HMR substrates available for high traffic areas, and our standard 5 to 7 day lead time still applies on high volume jobs. Get in touch and we'll talk through the scope.

Yes. We cut and machine joinery for the busiest areas in warehouses and logistics facilities — lunchrooms and break rooms with full kitchen cabinetry, changerooms and locker units, on site and mezzanine offices, packing and dispatch bench cabinets, workshop and maintenance bay storage, and driver amenity rooms. HMR substrates as standard for high traffic and damp prone spots. Bulk and multi stage rollouts handled as part of the normal job.

Since 2017. Cutting panels for cabinet makers, builders, shopfitters, commercial fitout contractors, and kitchen and bathroom designers across Melbourne.